Showing posts with label bags. Show all posts
Showing posts with label bags. Show all posts

Monday, 7 November 2016

Gift bags out of fabric scraps

Have you ever thought of making gift wrapping out of fabric instead of the paper? I hadn't so the challenge #6 in #12DaysofChristmasDIYChallenges was very welcome! I have fabric more than enough, plenty of material to use!

The challenge is set up by the following bloggers:

Jill @ Creating my way to Success
Vicky @ Vicky Myers Creations
Anna @ Tea and a Sewing Machine
Pam @ Threading My Way
Anne @ Domesblissity

I like to use gift bags when wrapping the presents, especially for grown up gifts. The shape of the present doesn't matter, just find suitable gift bag and you are done. Also, they are re-usable unlike the gift paper. The only person I know who has saved the gift papers was my grandma. She collected all the bigger pieces on Christmas eves and took them to the attic. I don't remember if she used them later on though. Anyway, I keep all the gift bags that come to our household, I have a nice pile of them and I don't remember when I last time actually bought a gift bag!

Of course they aren't always suitable so I have made some gift bags out of gift paper too and I also have couple rolls of tapestry (for the doll house but it might not need all of it...) that I have used. For example I made one for the baby gifts recently.

It is only natural that my answer to this challenge is gift bags out of scrap fabrics!

You need just some fabrics and thread, ribbon or something like it.


The red one is from my dad, it is very thick, probably meant for furniture some 20 years ago, green was left over from making advent calendars couple years back and the grey is from making a dress to my friend over 5 years ago. Some ribbon and woollen yarn.

And I just realised that I actually remember where my scrap fabric is from, should I be worried...?

Sewing is simple and nothing new there but here is a short tutorial just in case.


Cut rectangular parts on fold (becomes the bottom), longer than what they are wide. The longer they are, the deeper is the bag, naturally. Sew the sides, box the corners (optional).


Sew the thread/yarn/ribbon on the wrong side of the bag top. I used narrow zig zag so they would actually stay on. I folded the yarn double to prevent it from getting loose.


Sew the top. Leave the handles under the seam, fold over it and stitch over.


Done! So easy that there really is no excuse to buy any if you have suitable fabric on hand. Then you can just hope that the bag is actually saved and re-used. Maybe add a small tag asking to re-use the bag wouldn't be a bad idea?

Wednesday, 22 June 2016

Toy bag for car trip, travelling with kids part 1

The summer is here, at least in the form of holidays, if not for the weather. After last couple days of having warm enough to be able to go swimming the temperatures dropped to 10-15 degrees! During night even 0-5 degrees. But when the sun is high up, night is short and day is long Finnish people wake up from their winter sleep and start moving around. Someone has said that the whole Finland goes crazy when it is summer and I agree. There are summer events in every village, happenings and festivals for all day of the summer. The summer is so short that you feel like you can't waste any of it. It also includes usually lot of driving when you "have to" go to grandparents, summer cottage, zoo, amusement parks etc. In our case that means 3-4 hours drive quite often. Time to invent something to make the trips more fun by having something for the kids to do.

First part to ease these trips was make a toy bag for car trip, upcycled of course. Our kids like to take small toys to play with and they are usually quite well entertained just with those but there is a problem that I think almost any family knows. I mean of course falling toys. What is more frustrating than drop that favourite toy you just needed to the floor and the adults won't stop because of that? And for the adults the screaming that results is also frustrating, annoying... you get the point. I thought that we needed toy bags for the kids that won't fall and will prevent the toys falling too. It won't stop them falling while played but I hope it helps.



The toy bag has one fixed strap and the other one is adjustable so that it can be attached to the front seat. The kids have small tables attached to the front seats so the bags will rest on those, they don't have to hang anywhere. Attaching it to the car seat prevents the whole bag falling to the floor. I also used some cotton wool sheet to make it stand so it would actually keep the toys inside. It is also rather low (10cm high) for easier to reach and open on the top.

This upcycled toy bag is fairly easy to do but I wrote a short tutorial. I also realized that the tutorial I used to make quilt work bag doesn't want to be found anymore. The site directs me to Finnish version and that doesn't have the blog where I read the tutorial before. No matter what I do, use incognito-mode, switch the language to English on my browser, use my phone etc., it always directs me to the Finnish site. Quite annoying, actually. If I wanted the Finnish site, I would like to choose it myself, thank you very much. I then tried to find another tutorial describing how to make a bottom like this but couldn't find any. Many messenger bags are made using this kind of bottom but the tutorials I found were something like "assemble the bag, including bottom", not really helpful, right? Therefore I will make a tutorial for sewing the bottom later, now everything else.

I made two, of course, both upcycled old curtains that my mum found from eco-center for free!


I'm not surprised that the pink-blue was left to the eco-center, it isn't quite that fashionable now and I found couple small stains in it too. Nothing that matters for me though. The Moomin-curtain is more surprise to me. Only "problem" with it is that is sewn to go around the window, i.e. it has top- and side curtains all together. It isn't supposed to cover the window, it has been apparently used to frame the window. Quite nice for kids' room but I can understand why it might have been difficult to sell and thus ended up to the eco-center. The fabric is good quality and there is lots of it, so good for me someone discarded it!

First I cut the pieces.



From the main fabric one piece for the bottom and the other sides of the bag, two pieces to longer sides, two pockets and three pieces for straps; one short (8cm for this bag), one long (adjustable) and one shorter (fixed strap).

From lining: one part covering the bottom and two sides, two separate pieces to longer sides and out of cotton wool sheet 2 small pieces (for this bag 10cm x 12 cm, height x depth) and 2 longer pieces (10cm x 22cm, height x width). The cotton wool sheet is from old blanket and the lining old sheet.

Fold and iron the straps, sew with long stitch. Fold and iron the pockets, sew the top.



To give more support for toy bag I added extra layer to the bottom. Cut twice the size of the bottom, add seam allowances and sew the long sides. Iron the seam allowances open, turn.


And now the bag starts forming out fast. Baste the cotton wool-pieces to lining, sew as edge as you can so that these stitches will be inside the seam allowances. Attach the pockets to the lining. Assemble the lining and then the main body parts. Remember to leave turning gap on the lining! Tutorial with pictures coming later.

Attach the longest strap to the slider and you should have something like this:



Attach the straps to the exterior of the bag leaving the stitches under seam allowance. Slide the shortest strap through metallic ring, fold half and baste to its place, slide the longest strap through that same ring, through the slider and baste to its place. Like this:


Now your toy bag for car trip is almost finished! Place the exterior inside the lining right sides facing and sew around.




When I was making this first bag I didn't have my Wonder clips yet so I had to use pins but with Wonder clips it is this easy:


I noticed that if you iron the cotton wool sheet, it becomes stiffer. With the first bag I didn't realize this and it was a bit too soft and I thought if I should have added some other interfacing. That bag I ironed of course but more steamed the fabric than actually pressed because I didn't want to press the cotton wool. With the second bag I pressed accidentally and it turned out to be good accident! At this point I had the pink-blue bag ready and I took it, pressed all around it and had a much nicer looking bag! Sometimes accidents are for good.

If you, unlike me, remembered to leave the turning gap, you can just turn the bag around. If not, you have use for your seam ripper.

Iron, again. Cut a piece out of cartoon, the size of the bottom of your bag, put inside the bottom pocket made earlier, close it and put it inside your bag. It doesn't have to be attached, it can just be there. And you are done! The pink-blue bag has part of its lining fold over to the right side. I hope I could say this is exactly how I meant it to be but... Yeah, I cut the main fabric a bit too low and as the bag is quite low already, I didn't want to make any lower so I cut the lining higher and ironed it so that part of the lining is showing. Nice detail, I think. Also, sew some stitches on the corners on top of the seams and also stitch over the straps to secure them properly.



Then to details. Little My and these small electric guys are looking from the pockets:



The toy bag is stiff enough to stand on its own.


Close up from the straps:









I certainly hope this toy bag helps with the car trips! In any case, the kids both agree that these are great bags anyway. They like bags, there are always couple bags filled with toys or clothes. I was once wondering where some clothes are, there were couple pairs of pants and few shirts missing from the laundry and where they were? In a bag under the bed, I only found them after weeks. I had lifted that bag, I had seen it many times but didn't realize to watch inside! Also, very good use for upcycled curtains!

I didn't include any measurements, would you like them to be added? I scribbled something down, cut something, changed my mind, wrote over it, cut again, changed something etc. so my notes aren't quite that clear at the moment. But if you need those I can try and decipher my notes and add them here.

Upcyclelina's page on Facebook has a folder called "Second hand store finds", go and check it out! These curtains were there and I will add more as I find more. Also check my Pinterest boards, there is one about travelling with kids and it might give you a clue what I'm up to next. One of the boards is a group board (Suomalaiset käsityöblogit, i.e. Finnish handcraft blogs), join it or start following it if you find it interesting!

Saturday, 28 May 2016

Upcycled bag from old shirt




I have one handbag which shoulder strap is attached with safety pin and one that I recently bought from second hand store which shoulder straps are completely loose and not a chance I could fix them with safety pin. Should have known, it only cost 1€ and looked descent. Closer look tells me that the shoulder straps have been fixed with couple hand stitches by someone. Luckily didn't cost more and it has lots of material for new bags! This bag broke when I was walking with our dog from grocery store back home. I had thought that maybe a nice walk would help the stuck shoulders and neck. A combination of dog who simply can't stand other dogs while in leash and a handbag that I can't carry on my shoulder but instead had to grab it under my arm means that my shoulder and neck weren't definitely better when I got home!

Time to do something for it. I have a shirt that I like for the fabric and have kept it for that reason even though it doesn't quite fit to me now. I decided it was nice for a small hand bag for the summer as the colour is light blue. I wanted a handbag which size would be something like my old favourite bag, i.e. big enough to hold wallet, mobile phone and water bottle but not any bigger than that and this shirt was just nice size for that.


Front part of the shirt became front part of the bag and the back part the same way, shoulder strap was made out of the sleeves, the buttons were used and I also used one of the cuffs for inner pocket. This shirt has rather long cuffs, just good for a pocket.

Of course I had to take the shirt apart and I could just cut the seams, no need to rip anything. But of course shirt like this has darts and those can't be left unnoticed. The ones in front weren't on my way but the ones on back were so those had to be ripped open.

This upcycled bag follows pretty much the tutorial from http://www.handmadiya.com. I skipped the pocket part of the tutorial as I made the pocket with upcycled cuff. If you want to do it like I did, just sew your cuff on the lining. Cut the cuff in two, lower part being slightly bigger (you would want the button to be in this part), stitch the pocket part onto the lining. If you have thin lining I recommend using fusible interfacing behind the pocket (if you haven't attached the interfacing for the whole lining). Sew the cover of the pocket (the one with the whole) on to the lining right sides facing, turn the cover and stitch over it. This way you can make a pocket for important things like passport with very little effort.






The next step for me was to make a pocket outside the package using the buttons in front. After cutting the main fabric with buttons closed I cut the pattern in half following the lower edge of the button row, cut suitable part from lining and sew them together. Tip; use zipper pressing foot if you do this, not working with usual one!



After this it was just following the tutorial as linked above. The tutorial didn't include pattern but this one is easy enough to draw, just check that the length of the zip panel is exactly the same as the upper edge of the bag.

I used fusible interfacing for the main fabric and behind the inner pocket and of course that can't be upcycled. The fabric of the shirt is quite soft and thin and even with the interfacing it still doesn't look as neat as I would like it. However, with harder and thicker fabric it wouldn't even need interfacing to look nice.




The pictures taken inside are nothing compared to pictures taken outside, I think I will use the light outside as often as the weather allows it.

As always, feel free to pin my pictures in Pinterest - or follow me there! You can now follow me in Facebook too so remember to check that too!

Thursday, 19 May 2016

Fabric box and quilt work bag

My daughter has last year in kindergarten and it was time to gift her kindergarten teachers. They have had a recycling theme at the kindergarten so it's more than fitting to make the gifts out of recycled materials. My daughter wanted to bake cookies so I thought I would make fabric boxes for the cookies.



The outer fabric is from a dress that came to us in a package of used clothes and has never been used here. Apparently it isn't pink/violet enough for a little girl, even though I think it is pretty. I have tried to sell it, again, for couple of euros but maybe it wasn't pink enough to be worth of that. :D 


This is what I got out of the dress:


Naturally there is the skirt and the zip but I would like you to look at the white fabric on the left. It is from the hem line and its width is about 10cm, plenty of beautiful fabric for other projects! I kept the upper part as whole as it is my daughters size and I can sew it together with maybe something pink.

The rose fabric is a left over piece that I have had in my storage for 15 years, time to use it, I think?

First I attached the fusible interfacing to the brown fabric. It would have been good idea to use something stronger, or at least add it to both of them but works ok like this.


I cut the interfacing in parts rather than just one piece and left small gaps between the parts to make it easier to fold.

Then it was time to make and attach the ribbons. Fabric for the ribbon is from old shirt of mine. I would have like to use something from the dress or at least the rose fabric but they were too thick to be used in a small box like this. Simply, attach them to the right side of one fabric (it doesn't really matter which one).


Then just sandwich it (brown and rose fabric that is). Remember to make sure the ribbons don't go under your seam and leave a hole of 5cm for turning the box right way up. Turn it and iron! It looks kind of mess but ironing gives it the look it is supposed to have. Stich around 1-2mm from the edge to give it support and close the hole that was left to turn it. I also sew "a frame" on the bottom along the gaps of the interfacing, again to give it more shape. And you are done!


I have been meaning to give some fabric pieces to the kindergarten to be used for crafting but have been forgetting it whole year. Now I remembered it and I also made a small quilt work bag to put them in. Also the bag was part of the gift.




 I followed partly this instruction to make the bag. I took a selection of old children clothes and cut squares of 10cm x 10cm, sew the main piece together and the side pieces. I also made a lining for the bag to give it support. If you want to make like I did, follow the instructions behind the link for steps 1-4 and the same for lining (leave a gap of about 7cm in one of the seams to be able to turn the bag. Stich the handles on their places and sew the top edges of these two bags together, right sides facing of course. Use the gap to turn it around, close the gap. If you want real smooth finish, hand stich it or like I did, make a little seam over it. It doesn't show that much being inside the bag. Iron and you are ready! Though I stiched the corners to give it more shape but it isn't necessary. 

So the teachers got cookies and the boxes, the kids fabric for crafting and I some more space to my sewing room!

Elina